Scythe SCKC-3000 - Grand Kama Cross 3 CPU Cooler - 140mm

Scythe SCKC-3000 - Grand Kama Cross 3 CPU Cooler - 140mm Scythe SCKC-3000 - Grand Kama Cross 3 CPU Cooler - 140mm
    • ArtikelNr.: 804844
  • HAN: SCGKC-3000
  • EAN: 4571225055480
  • Artikelgewicht: 1,200 kg

  • knapper Lagerbestand ***
  • Lieferzeit: 2 - 3 Werktage
  • 36,89 €
  • inkl. 19% USt., zzgl. Versand (Standardversand)

Wird geladen ...


Type No. SCGKC-3000 / Grand Scythe cross 3
Features Third generation Grand Scythe cross series!
Large size original design, equipped with 14 cmFAN top flow cooler.

6 mm pipe diameter two 8 mm pipe diameter pipes 2 hybrid configuration allows realized high-end performance.

Top mounted fan structure
By adopting Orthodox structure meant the wind toward the motherboard from the cooler top cooling of the VR module chipset and socket around the MOS-FET, etc.

X fin structure
Structure set gap between Finn and improved air flow to the components on the motherboard.
We also prevent top place cooling unit and secure the clearance of the motherboard near the CPU cooler itself is inhibiting the overall system airflow.

Intel socket la1150 "Haswell" and la2011 V 3

Latest AMD socket FM 2 + "Kaveri" response

Increase the rigidity of the heat sink and thermal conductivity adopted fin thickness 0.4 mm

Adopt a nickel plated luxurious pipe to prevent oxidation

High-precision-based structure
Thick copper receiving heat base plate by the CPU heat sucks absolutely.

"Falcon 140" PWM model
round frame shape with a 120 mm fan with the same screw holes 140 mm PWM fans "Falcons 140" model adopted.
"Minor axis & large blade" by flow-oriented specification, while getting slit blade reduces air resistance.
Improved design of than to change the coloring of the blade.
* Characteristics of each motherboard BIOS and UEFI, FAN behavior may differ.

Employ screw securely mounted fan,
* Fan pre-installed

New design and bridge retention
Adopt a bridge pass the metal bar at the base of the heat sink retention system.
This achieves large heatsinks fitting and reasonable and easy to install.

Bridger tension-only drivers included
Optimize Bridger tension mounting, shaft length (150 mm) and small grip piece comes with a feature proprietary drivers.

Design of wide-range RPM?
Low-high rpm Rev count a great cooling performance heat sink design.
Ultra quiet mode support until the ultimate overclocking!

* Maximum performance and fan speed always comes in, the design is.
Higher rotational speed of fan cooling performance rose to linear and does not cause a sharp peak of cooling capacity.
In addition, also dropped the fan RPM always kept a certain level of cooling performance, does not cause rapid cooling dips.

Intel/AMD universal support
Specifications Size
140 (W) x 147 (H) x 171 (D) mm (including the included fan)
140 × 140 × 25 mm (with fan)

Fan rotation number 400 (± 300 rpm) ~ 1300 rpm (± 10%)
Noise and air flow CFM 12.5-30.7 dBA/29.90-97.18
Hydrostatic 0.98-10 Pa/0.10 ~ 1.02 mmH 2 O

Corresponding socket
Intel socket 775 / 1150 / 1155 / 1156 / 1366 //2011/2011 (V3)
AMD Socket AM2/AM 2 3 + /AM3/AM + /FM1/FM2/FM 2 +

6 mm pipe diameter × 2, 8 mm diameter x 2 book (processed nickel plating)
Weight 790 g (with attached fan)
Accessories illustrated with multilingual documentation (including Japan Japanese)

* - alle Preise inkl. MwSt., zzgl. Versandkosten

** - unverbindliche Preisempfehlung

*** - Gilt ausschließlich bei lagernder Ware (Großgeräte bzw. Speditionsware sowie B-Ware ausgenommen), die per Sofortüberweisung, PayPal, Giropay oder Nachnahme bezahlt wird. Sonntags und an gesetzlichen Feiertagen findet in unserem Logistikzentrum keine Versandabwicklung statt. Samstags findet die Versandabwicklung nur bedingt statt. Bitte beachten Sie zudem die Auslieferungsbedingungen der einzelnen Versanddienstleister.